1 8

DCA Custom Vanes

DCA - Mini Sabre Vanes

DCA - Mini Sabre Vanes

$34.99
$34.99
En vente Épuisé
Frais d'expédition calculés à l'étape de paiement.
Quantity
Color: White

DESCRIPTION

ULTRA STABLE - ULTRA TOUGH - ULTRA QUIET

Specs

Weight: 6.0 +/-0.1 Grains

Height: .465 Inches

Length: 2 Inches

Application Method

  1. Clean the arrow shaft or wrap with a clean, dry paper towel. Do not use acetone.
  2. Place Super Sabre in the fletching jig clamp. 2.5 degree helical is recommended as a starting point, but not required (left or right).
  3. Prep the base using the Primer Pen for a rock solid almost permanent bond.
  4. Apply  a very thin continuous bead of glue to the base. Do not spread it out.
  5. Using press the vane down holding it securely for 10 sec. (or recommended time on adhesive).
  6. Unclamp the vane and wipe excess glue from around the base of the vane.
  7. Let the adhesive cure for 10-15 min.
Afficher tous les détails

ULTRA STABLE - ULTRA TOUGH - ULTRA QUIET

  • SCIENTIFICALLY DEVELOPED OVER 2 YEARS USING:

    • CFD - Computational Fluid Dynamics
    • NASA Stability Calculations
    • A custom wind tunnel
    • A LabRadar (Doppler radar)

  • RIDICULOUSLY TOUGH MATERIAL

    This is the same material used on the outside of golf balls!  The material can be stretched and returned to shape. Pass-throughs on targets are no problem.  It is recommended to use the primer pen along with glue for almost permanent bond.

  • INDIVIDUALLY MOLDED

    The Super Sabres are all very consistent. Shown by the weight consistency of 7.1 +/-0.1 gr. All exactly identical. The 8-cavity mold means there will not be any shortages moving forward

APPLICATION VIDEO